Shop

SORT BY

  • LOW - HIGH
  • HIGH - LOW
  • A - Z
  • Z - A
ACCUAIR E-LEVEL CONTROLLER W/ TOUCHPAD

$1195.00

image

The e-LevelTM Electronic Leveling System is the heart of any AccuAir suspension package and provides unparalleled technology and features. This second generation controller offers the ability to save three unique vehicle heights into memory at the touch of a button using TruPositionTM Height Sensors installed in each corner of your suspension. These three heights are then instantly accessible from the user interface. The key to this technology is its RideMonitorTM Mode; while parked or driving the system will maintain the vehicle height when loading or unloading passengers and cargo or when road conditions change while driving. All of this automatic intelligence is unnoticed by the driver providing a consistent ride quality for all circumstances.

Operation of the e-LevelTM system is simple, yet its features are constantly working to provide you with the perfect ride-height in all conditions. Because the e-Level system utilizes height sensors instead of pressure sensors, changes in load are accurately corrected for. The adjustments made by an e-Level controller are so accurate that each wheel maintains its height within 1/8th of an inch and actually prevents cross-loading of air springs at a higher accuracy than any other method (Read Air on Scales). This is all made possible because the system calibrates to the vehicle upon installation and then learns how your air suspension behaves over time (similar to the technology used in today's advanced fuel injection systems). This flexibility allows the e-Level controller to be used on any vehicle with a wide variety of valve speeds and requires NO user tuning.

In addition to managing the height of your air springs, the e-LevelTM system also manages your air compressor(s). A 0-200 psi sealed tank pressure sensor lets the ECU know the constant status of the air tank. This eliminates the use of a mechanical pressure switch and lets the e-LevelTM system manage your compressor(s) more efficiently. Constant self diagnostics monitor every component in the system and notify the user if a problem occurs. The e-LevelTM system also constantly monitors the status of your vehicle™s batteries and automatically turns the compressor(s) OFF if the system voltage drops below 10.5 volts.

TouchPadTM: For the ultimate in form and function, the intuitive TouchPadTM is the top of the line interface option. Handheld or mountable, the TouchPadTM is available in black-anodize or nickel-plated aluminum and gives full manual control of each air spring individually as well as front and rear air spring control in pairs. Saving and accessing your three preset heights is only a touch away and a clean yellow glowing ring around each button clearly indicates the current vehicle height. The All-Down button fully deflates the vehicle for parking. Every button offers a crisp tactile feel and is backlit with crystal white LED's for clear daytime and nighttime operation. A 16 ft mini-USB cable provides communication to the ECU and plugs into the TouchPadTM in either the bottom or the back.

All wiring harnesses are color-coded and Plug-n-Play for quick and error-free installation.

Features:

– 3 Programmable Heights Lowered / Ride Height / Raised.
– Ride-Monitor-Mode adjusts as needed while driving or parked.
– TruPosition Height Sensors provide accurate leveling regardless of load.
– Ride Height on Start gets you ready to drive when you turn the key.
– Anti Cross-loading Technology gives balanced spring weights.
– TouchPad accesses your 3 programmable heights and controls each individual air spring or front and rear as a pair.
– Key-Chain Remote (optional) accesses your 3 programmable heights from up to 200 ft away.
– Automatically Calibrates to any Air Suspension System on any vehicle, (NO user programming required).
– Straight to Height adjustments avoid valve pulsing and gets you ready to drive immediately.
– Active Learning maximizes leveling performance after every adjustment.
– Manages Air Compressors for faster height recovery.
– Monitors Vehicle Voltage and automatically turns compressor(s) OFF at 10.5 volts to prevent a dead battery.
– 100% Weather-Proof for under vehicle mounting.
– Plug-n-Play wiring harnesses for ease of installation.
– Each System is 100% Factory Tested.

hidden field
ACCUAIR E-LEVEL CONTROLLER ROCKER SWITCH

$895.00

image

The e-LevelTM Electronic Leveling System is the heart of any AccuAir suspension package and provides unparalleled technology and features. This second generation controller offers the ability to save three unique vehicle heights into memory at the touch of a button using TruPositionTM Height Sensors installed in each corner of your suspension. These three heights are then instantly accessible from the user interface. The key to this technology is its RideMonitorTM Mode; while parked or driving the system will maintain the vehicle height when loading or unloading passengers and cargo or when road conditions change while driving. All of this automatic intelligence is unnoticed by the driver providing a consistent ride quality for all circumstances.

Operation of the e-LevelTM system is simple, yet its features are constantly working to provide you with the perfect ride-height in all conditions. Because the e-Level system utilizes height sensors instead of pressure sensors, changes in load are accurately corrected for. The adjustments made by an e-Level controller are so accurate that each wheel maintains its height within 1/8th of an inch and actually prevents cross-loading of air springs at a higher accuracy than any other method (Read “Air on Scales). This is all made possible because the system calibrates to the vehicle upon installation and then learns how your air suspension behaves over time (similar to the technology used in today’s advanced fuel injection systems). This flexibility allows the e-Level controller to be used on any vehicle with a wide variety of valve speeds and requires NO user tuning.

In addition to managing the height of your air springs, the e-LevelTM system also manages your air compressor(s). A 0-200 psi sealed tank pressure sensor lets the ECU know the constant status of the air tank. This eliminates the use of a mechanical pressure switch and lets the e-LevelTM system manage your compressor(s) more efficiently. Constant self diagnostics monitor every component in the system and notify the user if a problem occurs. The e-LevelTM system also constantly monitors the status of your vehicle™s batteries and automatically turns the compressor(s) OFF if the system voltage drops below 10.5 volts.

Rocker Switch Interface:

When mounting space and cost are paramount, the Rocker Switch Interface is a simple, yet effective solution. The primary function of the Rocker Switch is to access your three saved heights by pressing UP or DOWN to raise or lower between saved heights (current vehicle height is indicated by red and green LED lit arrows). A small program button (usually hidden under the dash) allows you to toggle through functions like manual control over each air spring individually, manual control over front and rear air springs in pairs, Re-Saving each of your heights, and adjusting system preferences.

Note: This system also works with the TouchPadTM to make for simple upgrading.

All wiring harnesses are color-coded and Plug-n-Play for quick and error-free installation.

Features:

– 3 Programmable Heights Lowered / Ride Height / Raised.
– Ride-Monitor-Mode adjusts as needed while driving or parked.
– TruPosition Height Sensors provide accurate leveling regardless of load.
– Ride Height on Start gets you ready to drive when you turn the key.
– Anti Cross-loading Technology gives balanced spring weights.
– Key-Chain Remote (optional) accesses your 3 programmable heights from up to 200 ft away.
– Automatically Calibrates to any Air Suspension System on any vehicle, (NO user programming required).
– Straight to Height adjustments avoid valve “pulsing” and gets you ready to drive immediately.
– Active Learning maximizes leveling performance after every adjustment.
– Manages Air Compressors for faster recovery / Stage II Package has a recovery time of only 52 seconds (100-150 psi).
– Monitors Vehicle Voltage and automatically turns compressor(s) OFF at 10.5 volts to prevent a dead battery.
– 100% Weather-Proof for under vehicle mounting.
– Plug-n-Play wiring harnesses for ease of installation.
– Each System is 100% Factory Tested.

hidden field
ACCUAIR VU4 4-CORNER SOLENOID

$515.00

image

The VU4 4-Corner Valve Unit is engineered to provide the cleanest installation and most reliable operation on the market. This electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has built-in push-to-connect 3/8 D.O.T. approved air fittings for all of it's plumbing connections. The robust internal solenoid valve architecture maximizes flow rates, provides bubble-tight sealing, and guarantees operation up to 200 psi for millions of cycles. All of this technology is housed in a unique enclosure design which routes each of the solenoid wires to a single weatherproof connector, eliminating typically loose wires. This not only improves the appearance, but it also guarantees proper operation for every installation. With an overall size of only 5″x 3″x 3″ and the ability to survive harsh under vehicle environments, this product is ideal for any application.

Features:

– For use with e-LevelTM Controller or any other brand of controller or switches.
– Pre-wired & Port Numbered for reduced installation time.
– 3/8″ Press-Fit D.O.T. fittings eliminate pipe threads for 100% leak free operation.
– High Pressure Rated for operation up to 200 psi.
– Dual Inlet & Exhaust ports for maximum flow (Plug extra inlet if not required).
– Compact Layout for minimal space usage (5″x 3″x 3″).
– Anodized Aluminum Manifold to prevent corrosion.
– 100% Weather Resistant for harsh under vehicle environments.

hidden field
ACCUAIR SWITCH SPEED CONTROLLER

$399.00

image

The SwitchSpeedTM Controller offers all of the standard functions that you’ve come to expect from a traditional switchbox, but that is where the similarities stop. AccuAir’s proprietary Advanced Burst-Control-TechnologyTM allows you to choose between three different modes of adjustment; Precise / Moderate / Full Speed. The burst speeds for each of these modes are user-tunable to achieve improved precision from even the largest valves on the market. Although the SwitchSpeedTM does not offer preset heights like the e-LevelTM controller; it can easily be upgraded to the e-LevelTM system down the road.

Hand held or mountable, the SwitchSpeedTM Controller is available in black-anodized or nickel-plated aluminum and gives full manual control over each air spring individually as well as front and rear air spring control in “pairs”. Saving and accessing your three preset speeds is only a touch away and a yellow glowing ring around each button clearly indicates the current valve speed. The All-Down button fully deflates the vehicle for parking at your currently selected speed. Every button on the SwitchSpeedTM Controller offers a “crisp” tactile feel and is backlit with crystal white LED™s for clear daytime and nighttime operation. A 20-ft mini-USB cable provides communication to the ECU and plugs into the controller in either the bottom or the rear. The SwitchSpeedTM Controller comes with a built-in compressor control feature that is enabled once the optional tank pressure sensor is plugged in.

hidden field

CONTACT US

LEAVE YOUR CONTACT INFORMATION BELOW
Devious Customs

6942 Ed Perkic Street, Unit G,

Riverside, CA 92504

Phone. 951-359-9666

Email. deviouscustoms1@yahoo.com